AMB ON Plus 31 UPS Series

Download Flyer

Feature
  • True double-conversion
  • DSP technology guarantees high performance
  • Output power factor 1
  • Active power factor correction in all phases
  • 50Hz/60Hz frequency converter mode
  • Dual AC inputs
  • Emergency power off function (EPO)
  • Generator compatible
  • Supports dual AC inputs
  • Adjustable battery numbers for long-run model
  • Maintenance bypass available
  • Parallel operation up to 4 units with common battery
  • Optional isolation transformer offers full isolation and complete
    common mode noise rejection

Specification

 

MODEL                            10K(L)*                              20K(L)*
PHASE 3Ph in 1Ph out
CAPACITY 10KVA / 10KW  20KVA / 20KW
PARALLEL CAPABILITY 4
INPUT
Nominal Voltage 3 x 400 VAC (3Ph+N)
Voltage Range 110-300 VAC ± 3 % @ 50% load; 176-276 VAC ± 3 % @ 100% load
Frequency Range 46~54 Hz or 56~64Hz
Power Factor   ≥0.99 @ 100% Load
Harmonic Distortion (THDi) < 4% at full linear load
OUTPUT
Output Voltage 208/220/230/240 VAC (1Ph+N)
AC Voltage Regulation (Batt. Mode) ± 1%
Frequency Range (Synchronized Range) 46~54Hz or 56~64Hz
Frequency Range (Batt. Mode) 50 Hz ± 0.1 Hz or 60 Hz ± 0.1 Hz
Current Crest Ratio 3:1 (max.)
Harmonic Distortion ≤ 2% THD (Linear Load); £ 5% THD (Non-linear Load)
Transfer Time AC Mode to Batt. Mode: Zero Inverter to Bypass: Zero
Waveform (Batt. Mode) Pure Sine wave
Overload Capability 100-110% for 60 min, 111-125% for 10 min, 126%-150% for 1 min; >150% immediately shutdown Battery Mode
BYPASS
Nominal Voltage 208/220/230/240 VAC (1Ph+N)
Voltage Range -30% ~ +20% (Adjustable)
Frequency Range (Synchronized Range) 46~54Hz or 56~64Hz
Overload Capability   > 130% 1 minute (default); continuously working until breaker protection (optional)
EFFICIENCY
AC Mode 95.5%
ECO Mode 98.5%
Battery Mode 94.5%
BATTERY
Battery Type 12V/9Ah 12V/9Ah
Numbers (10+10) pcs (16+16) pcs
Typical Recharge Time 9 hours recover to 90% capacity
Charging Current (max.) 1A (Default) 2A (Default)
Charging Voltage ±136.5 VDC ±218 VDC
Long-run Model – Battery Type Depending on the applications
Long-run Model – Numbers 16~20 pcs (Adjustable) 32~40 pcs (Adjustable)
Charging Current (max.) 1A ~ 12A (Adjustable)
Charging Voltage ±13.65V*N (N=8~10) ±13.65V*N (N=16~20)
INDICATORS LCD Panel UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditions
PHYSICAL
Standard Model – Dimension, D×W×H (mm) 630 × 250 × 826 815 × 300 × 1000
Standard Model – Net Weight (kgs) 124 207
Long-run Model – Dimension, D×W×H (mm) 630 × 250 × 826 815 × 300 × 1000
Long-run Model – Net Weight (kgs) 37 56
ENVIRONMENT
Operation Temperature 0-40°C
Operation Humidity < 95% and non-condensing
Altitude**  0 ~ 1500m at full load
Noise Level Less than 60 dB@1 Meter Less than 65 dB@1 Meter
MANAGEMENT
Smart RS-232 / USB Supports Windows® Family, Linux and MAC
Optional  SNMP Power management from SNMP manager and web browser

*If output voltage is set as 3 x 360VAC, the output power of the unit will be de-rated to 90%.

**If the UPS is installed or used in a placed where the altitude is higher than the maximum height, the output power will de-rated 1% per 100m.

*Products specifications are subjected to change without further notice.

Reviews

There are no reviews yet.

Be the first to review “AMB ON Plus 31 UPS Series”

Your email address will not be published. Required fields are marked *